Advertisement
Available languages
Available languages
CYCLE GUIDE --
CYCLES
Settings
and options
shown
in bold
are default
settings
for that cycle.
Not all settings
and
options
are available
on each
cycle.
Adjusting
drying
time on Manual
Cycles
_u_,,_s_ JH H HHHHHHHHHHHHHHH,
_J_
W]_ 5te_
<_
Back
More Info
When you select a Manual Cycle, the default time appears in
the display. Use the LCD controls to increase or decrease the
time in 1 minute increments. Press and hold to change the
time in 5 minute increments.
The maximum dry time is 100 minutes.
Selecting
the Drying
Temperature
A High heat setting
may be used for drying
heavyweight
items such as towels
and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight
items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic,
or heat-sensitive
fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Items to dry:
Small loads and
sportswear
Any load
NOTE: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive
fabrics.
Cycle:
Quick Dry
Timed Dry
Drying
Temperature:
High
Medium-High
Medium
Low
Extra Low
Air Only
High
Medium-High
Medium
Low
Extra Low
Air Only
Default
Time:
13
40
AvaiiaNe
Options:
Cycle Details:
Wrinkle Shield t
_-,
For small loads of 3-4 items.
Wrinkle Shield t
! _
Use to dry items to a damp level for items that do
[ _
not require an entire drying cycle, or to finish drying
i
slightly damp items. Select a drying temperature
based on the type of fabrics in your load. If you are
unsure of the temperature
to select for a load,
select the lower setting rather than the higher setting.
t Wrinkle Shield TM with Steam option isavailable only with High, Medium-High,
and Medium Drying Temperature settings.
CYCLE GUIDE-
CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, remove odors, and refresh fabrics.
_iiiii/_i_
iii i
iiii
_ii_ _ii i i_
_
:::::::::_
i_ _ i
_
_ _
Items to
'
Drying
Default
Available
refresh:
Cycle:
Temperature:
Time:
Options:
Cycle Details:
Shirts, blouses,
Quick Refresh
Medium-High
12
Wrinkle Shield t i (_
Use to remove odors and reduce light wrinkles.
and slacks
with Steam
Static Reduce
i _
Select the number of garment to be refreshed
i
(on some models). Do not add dryer sheets.
Enhanced
Touch Up
High
Medium-High
Medium
22
Wrinkle Shield t
Static Reduce
Mixed Loads
Use to remove wrinkles, including from loads left in
the dryer too long. Dry time will automatically
adjust
when the load size is sensed. Cycle run time cannot
be manually adjusted,
but Temperature is selectable.
Do not add dryer sheets
t Wrinkle Shield TM with Steam option isavailable only with High, Medium-High,
and Medium Drying Temperature settings.
8
Advertisement
