Advertisement
Available languages
Available languages
4.
Select
the
desired
cycle
NORMAL
CASUAL
BULKYITEMS
DELICATE
JEANS
Cycles
TIMED
DRY
HEAVY
DUTY
QUICK
DRY
ManualCycles -
SPECIALTY
CYCLES
MY CYCLE
Steam
C
TOWELS
TOUCH UP
,UICK REFRESH
Select the desired cycle for your load. See the "Cycle Guide"
or the display for more information
about each cycle.
If selecting Timed Dry, use LCD control buttons to adjust the
length of the cycle.
5, Set any cycle
settings
<_
Back
More Info
The default cycle settings will be displayed on the LCD screen.
You may adjust different settings, depending on whether you
have selected an Auto Cycle, Manual Cycle, or Steam Cycle.
See the "Cycle Guide" for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Auto Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
Automatic cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Manual Cycles:
When you select a Manual Cycle, the default time is displayed.
Use the LCD control buttons to increase or decrease the time
in 1 minute increments. Press and hold to change the time in 5
minute increments.
The default temperature
may be changed by pressing the
Temperature button until the desired dry temperature
is
selected.
Quick Refresh with Steam:
Select the number of garments in the load. The dryer will
automatically
set the drying time and temperature.
the Auto Cycle settings
to increase
drying
time
If all your loads on all Auto Cycles are consistently
not as
dry as you would like, you may change the default
settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental
conditions,
or personal
preference. This change is saved in memory and will affect
all of your Automatic
cycles, not just the current cycle/load.
<_
Back
More Info
There are 3 drying settings:
Factory preset dryness level.
Slightly drier clothes, 15% more drying time.
Much drier clothes, 30% more drying time.
To change
the drying
settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(the power button is off) to adjust the default settings.
Wrinkl
5hJe|d
With 5tea_
<_
Back
More Info
1. Before starting an Auto cycle, press and hold the
LCD control button for Dryness Level for 6 seconds.
The LCD will briefly display the regular Dryness
Level options, then change to show the default
setting options.
2. Press the LCD control button for the desired setting.
3. Press the BACK button to return to the main screen for
the selected cycle.
6. Select
any additional
options
Static Reduce
_gEcoBoost
for
Drum
Light
Add additional options such as Static Reduce and/or
EcoBoost by pressing the button for that option.
NOTE: Not all options and settings are available with all cycles.
10
Advertisement
