Microwave Oven Control; Display; Cancel/Off; Progress Bar - Whirlpool GH9176XMS0 Use & Care Manual

MICROWAVE OVEN
CONTROL
SENSOR
3AKE[ DINNER
POPCORN POTATO PLATE BEVFRAGE
SOFTEN
REHEAT COOK DLFROS[
COOK COOK WARM
TIME POWER HOLD
1
¢00_
4
T MER
5
COOK
8 9
O CLOCk:
MELT
STEAM
SIMMER
KIDS
ment
:ANC£L'OFF
®8
VENT FA_
5S_EF_S
0 0
LIGHT _URNtASLE
HIGH.ME_.NIG_T.O_F OmOF_
When power is first supplied to the microwave oven, a ":" will
blink on the display. Touch CANCEL*OFF to stop the blinking.
If the ":" blinks on the display at any other time, a power failure
has occurred. Touch CANCEL*OFF and reset the clock if needed.
If "RETRY" blinks on the display for 1 second, an invalid value
has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day or Timer
countdown.
The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during all cook cycles except
Warm Hold. The lines in each of the segments will light from left
to right as the time nears the end. When all 15 lines (all 3
segments) are lit, the cooking cycle is complete.
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the charts in
the "Cooking" and/or "Reheating" sections for additional
information.
The JET START
TM
control will start any function. If not touched
within 5 seconds after touching a pad, "START?" will appear on
the display as a reminder. If not touched within 5 minutes after
touching a pad, the display will return to the time of day mode
and the programmed function will be canceled.
If cooking is interrupted, touching the JET START
TM
control will
resume the preset cycle.
The JET START
TM
control, touched by itself, will automatically
start the microwave oven for a 30 second cook time at 100%
cooking power.
The JET START
TM
control, touched while the microwave oven is
operating in any cook function, will add 30 seconds of cook time
at the cook power currently in use. Each touch of the JET
START
TM
console pad will add 30 additional seconds of cook
time.
The 5 JET COOK
TM
controls share function with the numerical
pads 1-5. When one of the 5 JET COOK
TM
controls is touched
(while no function is operating), the oven will begin cooking at
high power for 1-5 minutes, depending on which pad is touched.
After cooking begins, the JET COOK
TM
controls return to their
normal numerical pad function.
The CANCEL*OFF pad stops most functions except for the
Timer, Child Lock and Demo Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch JET START control to resume the cycle.