Table of Contents
Advertisement
¸
The CANCEL.OFF
pad stops most functions except for the
Timer, Control Lock and Demo Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the cycle.
The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during Cook, JET DEFROST
TM
feature, Reheat and Sensor One Touch functions. The lines in
each of the segments will light from left to right as the time nears
the end. When all 12 lines (all 3 segments) are lit, the cooking
cycle is completed.
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following:
cooking
power, cook time and food quantity or weight. See the charts in
the "Cooking"
and/or "Reheating" sections for additional
information.
The START pad begins any function. If not touched within 5
seconds after touching a pad, "START?" will appear on the
display as a reminder. If not touched within 1 minute after
touching a pad, the display will return to the time of day mode
and the programmed
function will be canceled.
If cooking is interrupted,
touching START will resume the preset
cycle.
The JET START
TM
control will start any function. If not touched
within 5 seconds after touching a pad, "START?" will appear on
the display as a reminder. If not touched within 5 minutes after
touching a pad, the display will return to the time of day mode
and the programmed
function will be canceled.
If cooking is interrupted,
touching the JET START
TM
control will
resume the preset cycle.
The JET START
TM
control, touched by itself, will automatically
start the microwave oven for a 30 second cook time at 100%
cooking power.
The JET START
TM
control, touched while the microwave oven is
operating in any cook function, will add 30 seconds of cook time
at the cook power currently in use. Each touch of the JET
START
TM
console pad will add 30 additional seconds of cook
time.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
The microwave oven and timer must be off.
1. Touch CLOCK.
2. Touch the number pads to set the time of day.
3. Touch CLOCK or START.
To Remove:
1. Touch CLOCK.
2. Touch 0.
3. Touch CLOCK.
The time will disappear and ":" will appear on the display.
Tones are audible signals, indicating the following:
One tone
•
Valid entry (short tone)
•
End of Timer countdown
(long tone)
Two tones
•
Reminder, repeat each minute after the end-of-cycle
tones
•
End of stage in multistage cooking
•
Turn food during defrost cycle (short tones)
•
Hidden feature has been entered or exited
Three tones
•
Invalid entry
Four tones
•
End-of-cycle
To Turn Off/On Valid Entry Tones: Touch and hold the number
pad "1" for 5 seconds until 2 tones sound. Repeat to turn tones
back on.
To Turn Off/On All Tones: Touch and hold the number pad "2"
for 5 seconds until 2 tones sound. Repeat to turn tones back on.
Hide quick links:
Advertisement
Table of Contents
