Simple Troubleshooting - VIORE PD42VH80 Manual

Simple Troubleshooting
If the display fails or the performance dramatically,check the display in accordance with the following
instructions. Remember to check the perpherais topinpoint the source of the failure. If the display still
fails to perform as expected, contact the dealer for assistance.
SYMPTOM DEALING METHOD
Check the power connection.
NO POWER Pull the plug out, wait for 60 seconds, then reconnect the power
and open the set
Check the antenna connection.
NO PICTURE Try other TV channel due to the TV station problem.
Modify the brightness or contrast setting.
Increase the volume.
NO SOUND Check that if the set is on the mute state or not.
Check the voice setting condition.
Check the voice mode setting condition.
ABNORMAL COLOR Check the antenna connection
NO RESPONSE OF THE Check the effect of the batteries, if needed, please replace the
REMOTE CONTROL batteries or clean the remote sensor window.
The distance between the set and the remote control should be
less than 6 meters.
The SCREEN FLASH IN The parameter is too big.
VGA MODE Please use safety mode when restart the PC, and set the
parameter of the monitor according to the instruction.
SOME INTERFERE IN THE Please modify parameter of the monitor according to the instruction.
VGA MODE
CLEAN THE TV SET Please pull the plug out when clean the screen. Using soft ,
clean cloth to wipe it off. If need to clean further, please use dry
cloth, don't use naphtha or other thinner liquid.
COLOR SPOT For this product using high definition panel, and this panel
having it is special character, there exist some color spots, so it
normal when the user find few color spots it not a quality problem.
The standard to inspect this panel are all the same which is out of
the scope to replace the product.