Table of Contents
Advertisement
By pressing the up/down arrow keys (_._) on the remote and moving the highlighting, the setting for each
option can be changed by pressing the Enter key (_'_2%_) once the desired choice is highlighted. The
currently saved setting will be indicated by an orange ball, as shown in the figure above.
In order to configure the BD player for proper audio and video output, press the up/down arrow keys (_-_)
on the remote until one the following setup menu categories is highlighted:
Language
Display
Audio
Parental
System
Network
4.2
LANGUAGE
MENU
CATEGORY
From the main setup menu, press the up/down
arrow keys (_._) on the remote until the Language
menu
category is highlighted.
Then, press the right arrow key (_) on the remote until the center portion of the
setup screen is highlighted.
4.2.1
Audio Language
To set the player's
audio language,
press the up/down
arrow keys (_)
on the remote until the Audio
menu choice is highlighted
in the center of the setup menu screen.
Then, press the right arrow key ( _ )
on the remote until the rightmost
portion of the setup screen is highlighted.
The up/down
arrow keys (_)
on the remote can then be used to select English,
French, Spanish,
or
Chinese
as the default language
the characters
in the movie will speak.
Once the desired
language
has
been highlighted,
press the Enter key (_)
on the remote to select the language.
The orange circle will
then move to that language.
Selecting
'Auto' will result in the default audio language
being determined
from information
on the
BD/DVD
disk.
NOTE:
Not all languageS
are avaiiable
on ali disks:
J
NOTE:
Som e disk s might not allow the user tO select the audio langUage fr0m the BDip!ayer
setup
menu
Th e audi 0 language
ca n 0nly be selected
from the BD or DVD disk S setup I
menu. (The menu that appears
after the dsk has been
nserted)
...............
J
4.2.2
Subtitle
Language
To set the player's default subtitle language,
press the up/down
arrow keys (_-_) on the remote until the
"Subtitle"
menu choice is highlighted
in the center of the setup menu screen.
Then, press the right arrow
key (_) on the remote until the rightmost
portion of the setup screen is highlighted.
11
Advertisement
Table of Contents
