EVGA inDtube Owner's Manual page 9

2. Follow instructions A or B depending on which video connection you
want to use:
A - If your cable or satellite box has an available Video RCA
B - If your cable or satellite box has an available S-Video output,
attach it to the AV-input adapter's S-Video input. Using this
confi guration will result in the best image quality.
3. Connect the audio output of your
cable or satellite box to the 3.5mm
stereo input located on the
AV-input adapter.
Note: If your cable or satellite box
does not have a 3.5mm stereo output,
then an RCA Y-Adapter to single
3.5mm audio cable will be needed
(not included).
4. At this stage, inDtube is properly connected to receive satellite or cable
feed.
Note: If no more video and audio outputs are available on your cable or
satellite box, then connect to inDtube by using the coaxial jack. The output
should be labeled "Out to TV," "TV Output" or something similar. A coaxial
cable will be needed (not included) as well as the F-Connector to MCX
Adapter (included) to connect to inDtube's MCX input. The AV-input adapter
is not needed for this confi guration. The cable or satellite box needs to
provide such an output for this confi guration to work.
Note: The included software supports Macrovision. This means you can not
record media through the AV-input adapter if Macrovision is being used on
the source. For example: Trying to copy a DVD. For more information please
visit http://www.Macrovision.com
output, attach it to the AV-input adapter's Video RCA input.
RCA Audio Y-Adapter
7