EVGA inDtube Owner's Manual page 8

Coax Cable Set-up
Your coax cable line will most likely have an F-Connector attached to the
end. Use the F-Connector to MCX Adapter (included) to properly connect
your coax cable line to inDtube's MCX input.
Cable and Satellite Set-Top Box Set-up
1.Connect the AV-input adapter (included) into the input located on the rear
of inDtube next to the gold platted MCX input. The AV-input on inDtube is
notched and will only fi t one way. Do not force in as this may cause
irreversible damage to both the AV-input adapter and inDtube.
6