Cleaning The Blower Housing; Fuel System Maintenance; Replacing The Fuel Filter - Toro TimeCutter Z5030 Operator's Manual

Cleaning the Blower Housing
To ensure proper cooling, make sure the grass screen,
cooling fins, and other external surfaces of the engine
are kept clean at all rimes.
Annually or every 100 hours of operation (more often
under extremely dust 5 dirty conditions), remove the
blower housing and any other cooling shrouds. Clean
the cooling fins and external surfaces as necessar> Make
sure the cooling shrouds are reinstalled. Torque the
blower housing screws to 5.5 fr-lb (7.5 N-m).
Important:
Operating the engine with a blocked
grass screen, dirty or plugged cooling fins, and/or
cooling shrouds removed, will cause engine damage
due to overheating.
Fuel System
Maintenance
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or
explosion from gasoline can burn you and
others and can damage property.
• Perform any fuel related maintenance when
the engine is cold. Do this outdoors in an
open area. Wipe up any gasoline that spills.
• Never smoke when draining gasoline, and
stay away from an open flame or where a
spark may ignite the gasoline fumes.
Replacing the Fuel Filter
Service Interval: Every i00 hours--Replace the fuel
filter.
Never install a dirty filter if it is removed from the fuel
11he.
.
Park the machine on a level surface and disengage
the blade control switch.
2. Move the motion control levers outward to the
park position, stop the engine, remove the ke 5 and
wait for all moving parts to stop before leaving the
operating position.
3. Raise the seat and locate the fuel line coming from
the fuel tank below. The fuel filter is in the fuel line
between the tank and engine.
3O