Sony Trinitron KV-20V50 Manual page 29

Chapter 2: Using Basic Features
WatchingW Programs
BOX .. "IV POWER POWER
RM-Y119
Press POWER on the "IV or the Remote Commander to turn the TV on.
The TIMER/STANDBY indicator b/inks until the picture appears.
POWER
V-1
or
POWER
Turn the cable mode on or off to select the type of chanr_el you want to watch, VHF/UHF or cable TV.
(Follow the steps in "Turning the Cable Mode On or Off," p. 17.)
If "VIDEO" or "S VIDEO" is displayed on the screen, press the 7V or TV/VIDEO
button so that the channel number appears.
Select a channel in one of the following two ways:
To scan the preset channels* in numerical sequence
Press CH +/-. ....
* For more information on presetting channels, see pp. 18-21.
To select a channel directly
Press 0 - 9 and ENTER.
For example, to select channel 14, press 1, 4 and ENTER.
@®®
®®®
DISPLAY 0 @ E6R
4
Press VOL +/- to adjust the volume.
VOL
The display wi# disappear automatically after 3
seconds.
VOLUME
Illllllllllllllllll_ll' .....................................
Press + to increase the volume.
Press - to decrease the volume.
To turn off the TV
Press POWER on the TV or the Remote Commander again.
-=_,
¢D
--" €'_
u=: .._"
N
C_e,_: u_ _ _._ 29