(Picture-In-Picture - Sony Trinitron KV-20V50 Manual

Connecting O therEquipment
After connecting, you will be able to... -- Play back video tapes
-- Watch two TV programs at once using a window picture
(Picture-in-Picture, pp. 38-43)
Rear of 1-V
I
VHF / UHF
,o
AUDIO-L AUDIO-R
(white)
y (red)
to S VIDEO
YC-15Vi30V (not supplied)
tOVHFAJHF:
RK-74A (not supplied)
KV-27V55
to audio
output
VHFflJHF output [
.=m--_ : Signal flow
i
I
to S video
output
VCR
1
• If you connect a monaural VCR, connect the audio output of the
VCR to the L (MONO) jack of VIDEO 1 IN on the TV.
The monaural sound will be heard from both speakers.
• For operating instructions, refer to the instruction manual
furnished with the VCR.
• If the picture or sound is affected, move the VCR away from the
TV.
• If S VIDEO is set to OFF, you cannot watch VCR playback
pictures from the S VIDEO IN.
To set S VIDEO to ON, see "Watching a Video with Your S
Video-Equipped VCR', 13.28.
About S video input
Video input and output signals can be separated into Y
(luminance or brightness) and C (chroma or color) signals.
Usually these two signals are combined in a VCR and sent
as one signal to a TV. Separation of the Y and C signals
prevents them from interfering with one another, thereby
inproving picture (especially color) quality.
This TV is equipped with an S video input jack through
which these separated signals can be input directly. This
way you can connect your S video-equipped VCR
separately from a non-S video VCR.
2
Chapter 1: Setting Up