Sony Cyber-shot DSC-T30 User's Manual / Troubleshooting page 67

3
Set the mode switch to [_, then
turn on the camera and the
computer.
Set the switch on the cable for
multi-use terminal to "CAMERA".
1
Connect the camera to your
computer.
To the multi connector
Cable for multi-
use terminal
• Wi(h Windows XP, tile AmoPlay wizard
appears on the desktop.
"USB Mode Mass Storage" appears on the
screen of the canmra.
USB Mode
Mass Storage
-- Access
indicators"-
Memory Stick
Switch on
When a USB couuection is established lk_r
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* During communication, the access indicators
turn red, Do not opera(e the conlpuler until the
indicators lul'n white,
• If "USB Mode Mass Slorage" does not appear.
set [ USB Connect] to [Mass Storage] (page 611.
n
• For Windows 2000/Me, lollow tile procedure
exphdned in "StzJge 3-B: Copying inmges to a
Computer" on pz_ge69.
• For Windows XP, when the wizard screen does
not appear automatically, hdlow the procedure
exphdned in "StzJge 3-B: Copying inmges to a
Computer" on pz_ge69.
This section describes an example of
copying images to a '_My Documents"
lk_lder.
67