Sony Cyber-shot DSC-T30 User's Manual / Troubleshooting page 42

Fordetailson the operation_ page 33
Selects whether the camera performs continuous shooting or not when you press the shutter butlon.
MultiBurst(t_)
Records 16 frames in succession as a still image file when
you press tile shutter button.
• This is convenient lor cbecking your lorm in sports, lor example,
• You can select the Multi Burst shutter interval ill [Interval] mode
(page 43),
ExpBrktg(BRK)
Records a series of Ihree images with the exposure values
automatically shifted.
• When you cannot decide the correct exposure, shoot in the Exp
Brktg mode, shitting the exposure value. You can select the
image with the best exposure afterward,
Burst(0)
Records the maximum number of images in succession (refer
to the lkdlowing table) when you press and hold down the
shutter button.
• When +'Recording" disappears, you call sbool tile next image.
Normal Does not shoot continuously.
On the [Multi Burst]
• You Call Successively play back images shol hi the Multi Burst nlode
using
the lollowing procedures:
To pause/resume: Press • on the control breton.
To play back liame-by-li"ame: Press _/_ ill pause mode. Press • to resmne playback ill series.
• You cannot use tim lollowing hmctions in file Multi Burst mode:
gnlart ZOOlll
Flash
Dividing a series of images shot in tile Multi Burst mode
Extracting or deleting a liame in a series (if images shot in the Multi Burst mode
Setting the liame interval to a mode other than [ 1/301 wben _ (Camera) is set to [Auto]
• When playing back a series of images shot in the Multi Burst mode using a conlputcr or a camera not
equipped with tile Multi Burst hmction, the image is displayed as a single image with 16 li+ames.
• Tile image size of images shot in the Multi Burst mode is I M+
• You nmy not be able to shoot images in tile Multi Burst mode depending on tile Scene mode (page 29).
On the [Exp Brktg]
• Tile flash is set to ]'_ (Flash lorced oil).
• Tile locus and white balance arc adjusted lot tile first inlage, and these settings are also used lor tile oilier
images.
• When the exposure is nlanually m/iusled (page 37), the exposure is shilted based on the a<.liusled
briglltness+
• Tbe recording intcl_'al is approximately 1 _cond.
• If tile subject is too bright or too dark, you inay be unable to sllool properly with tile selected bracket step
vahle.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene mode (page
29).