Using the Amp Draw
Meter
Figure 27
G0449 Maximum Amp Load .......................44A
G0450 Maximum Amp Load at 220V .........40A
G0450 Maximum Amp Load at 440V .........20A
Figure 28
Figure 27
Figure 29.
Sanding
Close all covers and panels before start-
ing the drum sander. Failure to do so could
result in severe personal injury.
DO NOT sand more than one board at a time
side-by-side. Minor variations in thickness
can cause one board to be propelled by the
rapidly spinning sanding drum and ejected
from the machine. NEVER stand directly in
front of the machine. Failure to do so could
result in severe personal injury.
To sand a workpiece:
1.
Depth of Cut
2.
3.
4.
Page 26