Sharp AQUOS LC-52E77U Operation Manual page 8

QUICK REFERENCE
1 Attach your antenna to the back of the television.
(See page 8.)
2 Connect the AC plug for the television into the AC
outlet.
o o 1
J i
: I
Place the TV close to the AC outlet, and keep the power
plug within reach.
,, TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WiTH THE AC CORD CONNECTED.
3 Place the Ferrite core in the space indicated in the
below figure and bundle the cords properly with
the cable clamp.
Ferrite core
Use the remote control unit by pointing it towards the
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
1T (5 m)
30 °
m Cautions regarding the remote control unit
o Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
o Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
o The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
4
How to turn on the television for the first time.
A) Press POWER on the television.
L
B) The POWER indicator on the front of the
television lights GREEN.
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
press TV POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
POWER indicator
Speakers cannot be detached from the TV.
The TV can be rotated up to 10 degrees to right and left.
Q-7