Sharp AQUOS LC-52E77U Operation Manual page 40

Appendix
Problem Possible Solution
o No power o Check if you pressed TV POWER on the remote control unit. (See page 14.) If the
indicator on the TV does not light up, press POWER on the TV.
Is the AC cord disconnected? (See page 7.)
Has the power been turned on? (See page 14.)
o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation.
In this case, operate the unit after first turning off the power of the TV or unplugging
the AC cord and replugging it in after 1 or 2 minutes.
o Remote control unit does not
operate.
o Is the FUNCTION set correctly? Set it to the TV setting position.
o Are batteries inserted with polarity (÷, -) aligned? (See page 8.)
Are batteries worn out? (Replace with new batteries.)
o Are you using it under strong or fluorescent lighting?
o Is a fluorescent light illuminated near the remote control sensor?
o Picture is cut off/with sidebar o Is the image position correct? (See page 25.)
screen. . Are screen mode adjustments such as picture size made correctly? (See page 18.)
Strange color, light color, or color o Adjust the picture tone. (See pages 21 and 22.)
misalignment o Is the room too bright? The picture may look dark in a room that is too bright.
Power is suddenly turned off. . Is the sleep timer set? (See page 15.)
Check the power control settings. (See page 23.)
o The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
No picture
No sound
o The TV sometimes makes a
cracking sound.
Is connection to other components correct? (See pages 12 and 13.)
Is correct input signal source selected after connection? (See page 28.)
Is the correct input selected? (See page 28.)
Is picture adjustment correct? (See pages 21 and 22.)
Is "On" selected in "Audio Only"? (See page 28.)
Is a non-compatible signal being input? (See page 42.)
Is the volume too low? (See page 15.)
Is "Variable" selected in "Output Select"? (See page 29.)
Have you pressed MUTE on the remote control unit? (See page 15.)
This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
The error message about reception of broadcast
The example of an error message Error code Possible Solution
displayed on a screen
o Check the antenna cable. Check that the antenna is correctly
o Failed to receive broadcast. E202
setup.
o No broadcast now. E203 o Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
o When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
o Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: - 4°F to ÷ 140°F (- 20°C to ÷ 60°C)
Q- 39