Cleaning And Care - Sharp R-209B Operation Manual

CLEANING AND CARE
Exterior
The outside surface is painted. Clean the outside with mild soap and water; rinse and dry with a soft
cloth. Do not use any type of Ihousehold or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to remove any spills or spatters. Metal parts will
be easier to maintain if wiped frequently with a damp cloth. Avoid the use of spray and other harsh
cleaners as they may stain, streak or dull the door surface.
Touch Control Panel
Care should be taken in cleaning the touch control panel. If the control panel becomes soiled, open
the oven door before cleaning. Wipe the panel with a cloth dampened slightly with water only. Dry
with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close door and touch STOP/
CLEAR.
Interior
Cleaning is easy because little heat is generated to the interior surfaces; therefore, there is no baking
and setting of spills or spattering. To clean the interior surfaces, wipe with a soft cloth and warm
water. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil,
use baking soda or a mild soap; rinse thoroughly with hot water. NEVER SPRAY OVEN CLEANERS
DIRECTLY ONTO ANY PART OF THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so requires special care. Keep the waveguide cover clean
to assure good oven performance. Carefully wipe with a damp cloth any food spatters from the
surface of the cover immediately after they occur. Built-up splashes may overheat and cause smoke
or possibly catch fire. Do not remove the waveguide cover.
Odor Removal
Occasionally, a cooking odor may remain in the oven. To remove, combine 1 cup water, grated peel
and juice of 1 lemon and several whole cloi/es in a 2 cup glass measuring cup. Boil for several
minutes using 100% power. Allow to set in oven until cool. Wipe interior with a soft cloth.
Turntable/Turntable Support
The turntable and turntable support can be removed for easy cleaning. Wash them in mild, sudsy
water; for stubborn stains use a mild cleanser and scouring sponge as described above. They are
also dishwasher-proof. The turntable motor shaft is not sealed, so excess water or spills should be
wiped up immediately.
Exterior
Turntable
Turntable Support
14