Table of Contents
Advertisement
Supplied accessories
Make sure the following
accessories
are provided
with the product.
f
Remote
control
unit (X1)
"AA" size battery
(X2)
AC cord (X1)
Stand
unit (X1)
Operation
manual
(X11
Page 8
Page 8
Page 7
Page 6
Always use the AC cord supplied with the TV.
QUICK REFERENCE
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
, Attach the stand in the correct
direction.
, Be sure to follow the instructions, incorrect installation of the stand may result in the TV falling over.
1
Confirm the 8 screws supplied with the TV.
Short screws (X4)
Long screws (X4)
(used in step 2)
(used in step 3)
2
Remove the covering sheet of the stand.
_f_Attach the base to the post.
Attach the base to the 4 screws into the 4 holes on
the bottom of the base.
Insert the stand into the openings on the bottom of
the TV.
_2_
Insert and tighten the 4 screws into the 4 holes on the
rear of the TV.
Hex key--(i
Screw --
Soft cushion
For protection, sheets
are covering the product.
Please remove these
sheets before use.
To detach the stand, perform the step in reverse order.
_=6
Advertisement
Table of Contents
