Table of Contents
Advertisement
Starting
setup
The Starting
Setup
menu appears
the first time
you turn on the TV, and assists
you to select the
menu language,
specify
the Air/Cable
setting,
and program
your channels
automatically.
IMPORTANT:
Make sure that the antenna
or cable
TV system
connection
is made!
1
To turn on the TV, press POWER
(POWER
indicator
on the front of the unit changes
green.
It may take approx. 10 seconds
for a picture to
appear on screen.). The starting setup function
begins. Press < or • to select your desired
language.
2
3
4
Press • or • to select "Signal Type", then press
< or • to select "Cable" or "Air".
Press • or • to select "Automatic Search", then
press • or ENTER.
Now the "Auto Setup" starts. After the starting
setup is completed,
the TV channel appears
on
the screen.
• Depending on the reception
condition,
it may
take from 15 minutes to 30 minutes to complete
memorizing digital cable channels. Please be
patient.
NOTE:
• If you press EXIT in the process of "Auto Setup",
the Starting
Setup stops and changes
to the normal
screen.
• When you make a menu selection,
your changes
occur immediately.You
do not have to press EXIT to
see your changes.
• When you are finished
programming
the menus,
press EXIT.
TV operation
2
To turn on the TV, press POWER.
(POWER
indicator
on the front of the unit
changes
green. It may take approx. 10 seconds
for a picture to appear on screen.)
Adjust the volume level by pressing
VOL + or -.
The volume
level will be indicated on the screen
by blue bars. As the volume level increases,
so do
the number
of bars. If the volume decreases,
the
number
of blue bars also decreases.
t-t
Set the Signal Type option to the appropriate
position
(see "Air/Cable
selection"
on page 18).
4"
Press the Direct Channel
Selection
(0-9, -)
buttons
to select the channel.
(If you press only channel number, channel
selection
will be delayed for a few seconds.)
TO SELECT
ANALOG
CHANNELS
1-9:
Press 1-9 as needed.
Example,
to
select channel
2, press 2, then press
ENTER.
10-99:
Press the 2 digits in order. Example,
to select channel
12, press 1,2, then
press ENTER.
100-135:
Press the 3 digits in order. Example, to
select channel
120, press 1,2, 0, then
press ENTER.
TO SELECT
DIGITAL
CHANNELS
Press the first 3 digits, then press the - button,
followed
by the remaining
number.
Example,
to select channel 015-001,
press 0, 1,
5, -, 0, 0, 1, then press ENTER.
• If a channel
is selected
with only audio content,
"Audio only" will be displayed
on the screen.
• If a channel
is selected
with a weak digital
signal, "Digital channel
signal strength
is low"
will be displayed
on the screen.
The same program
may be available
on either
an analog channel
or a digital channel.You
may
choose to watch either format.
• If a channel
is selected
to which you have not
subscribed,
"Digital channel is encrypted"
will
be displayed
on the screen.
VHF/UHF/CABLE
CHANNELS
Cable
Air
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-l)
100-135
(100) (135)
01
(4A)
NOTE:
• If a channel
with no broadcast
is selected,
the
sound will automatically
be muted.
• It may take a few seconds
for a digital channel
picture to appear on screen after being selected.
To select
the video
input
source
To view a signal from another
device connected
to
your LCD TV, such as a VCR player, press INPUT
SELECT,
then press
A/•
or corresponding
Number
buttons
(0-7), then press ENTER. You can select TV,
Video1, Video2,
Component,
HDMI1,
HDMI2,
HDMI3
or PC depending
on which input jacks you used to
connect your devices.
OH +/-
Press and release
OH +/-. The channel automatically
stops at the next channel set into memory.
For proper operation,
before selecting
channels,
they
should
be set into the memory. See "Memorizing
channels"
on pages
19 and 20.
Advertisement
Table of Contents
