Repeat playback
Title,
Chapter
Playback:
1
Press PLAY MODE during
playback
or stop
mode.
2
Press ENTER
repeatedly
to select"Chapter"
or
"Title".
The unit automatically
starts repeat playback
after finishing
the current title or chapter.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat
playback.
Press PLAY MODE again to make the screen
disappear.
• In stop mode,
press PLAY to start Repeat
playback.
• To resume
normal playback,
select
Repeat
"Off" in step 2.
A-B
Repeat
Playback:
A-B repeat playback
allows you to repeat material
between
two selected
points.
1
Press REPEAT
A-B during playback.
The start point is selected.
2
Press REPEAT
A-B again.
The end point is selected.
Playback
starts at the
point that you selected.
Playback
stops at the end
point, returns to Point A automatically,
then starts
again.
3
To resume
normal playback
press REPEAT A-B
again.
"_ Off"
appears
on the screen.
NOTE:
• Some discs may not work with the repeat operation.
• In A-B repeat mode,
subtitles
near point A or B may
not appear.
• During the A-B Repeat Playback
the ANGLE
feature
will not operate.
• You may not be able to set A-B Repeat, depending
on the scenes of the DVD.
• A-B Repeat does not work with an interactive
DVD,
MP3/WMA/JPEG-CD.
Marking desired scenes
The TV/DVD
stores
the points
that you want
to
watch
again,You
can resume
playback
from that
scene,
Marking
the
scenes:
1
Press MARKER
during playback.
2
Select the blank Marker using • or v, then press
ENTER
at the desired
scene.
3
l (Marker1
00:27:54)
1
Marker2
:
:
Marker3
:
:
• Up to 3 scenes can be selected.
• Repeat this procedure
to set the other 2
scenes.
Press MARKER
to remove this display.
Returning
to the scenes:
1
Press MARKER
during playback
or stop mode.
2
Press • or • to select the Marker
1-3.
3
l
Marker1
00:27:54
]
[ Marker2
01:16:25]
Marker 3
02:08:31
Press ENTER.
Playback
starts from the marked scene.
To cancel
the
mark:
1
Press MARKER
during playback
or stop mode.
2
Press • or • to select the Marker
1-3.
3
Press CANCEL.
Press MARKER
to remove this display.
NOTE:
• The marking
is canceled
when you eject the disc or
turn the power off.
• Some subtitles
recorded
around the marker
may fail
to appear. [DVD]
Changing soundtrack language
You can select the language
when you play a
multilingual
disc.
1
Press AUDIO during
playback.
The current
soundtrack
language
will appear.
2
Press AUDIO repeatedly
until the desired
language
is selected.
The on-screen
display will disappear
after a few
seconds.
NOTE:
• If the desired
language
is not heard after pressing
AUDIO several times, the language
is not recorded
on the disc.
• Changing
soundtrack
language
is canceled
when
you eject the disc.
The initial default language
or available
language
will be heard if the disc is played
back again.
27