Table of Contents
Advertisement
Viewing Closed Captions (On-Screen Text Messages) -Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to
TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
1,
Press the MENU button to display the menu.
Press the A or • button to select "Setup", then press the ENTER _
button.
2,
Press the A or T button to select "Caption", then press the ENTER _
button.
3,
Press the ENTER _ button to select "Caption".
Press the A or T button to select "On", then press the ENTER _
button.
4_
Press the A or T button to select "Caption Mode", then press the ENTER
button.
Press the A or _' button to select submenu (Default, CCI*_CC4 or Text1~Text4)
you want, the press the ENTER _
button.
Press the EXIT button to exit.
. The default is "CCI".
• CCI: The Primary Synchronous Caption Service. These are captions in the
primary language that must be in sync with the sounu, preferably
matched to a specific frame.
• O02: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried
the program.
• C03: Secondary Synchronous Caption Service.
Alternate program-relatec caption da_a.typically second language
captions.
, C04: Special Non-Synchronous Use Captions. Similar to CC2.
, Te×tl: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data. usually no[ program related.
• Te×t3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are
not sufficient.
>The Caption feature doesn't work in Component, HDMI or PC modes.
>The availability of captions depends on the program being broadcast.
Press the CO button on the remote control to turn the Caption "On" or "Off".
C7
Advertisement
Table of Contents
