Connections
Connecting VHF andUHF Antennas
ff you do not have a cable system, you will need to connect an antenna to your TV
Antennas with 300-ohm Flut Twi_ Leads
If your antenna looks like this: _
i_has 300_ohm fiat twin leads
Place the wires from the lwin
leads under the screws on the
300-75 ohm adapter¸ Use a
screwdriver to tighten the
screws.
2
Plug the adapter into the
..,
ANT-A terminal on the back
panel oF the TV.
Antennas w ith 75-ohmRound Leads
If your antennalookslikethis: _
it is an antennawith 75_ohmround leads
Pbg the antenna lead into the
ANT-A terminal on the Back
paneJ of the TV
Separate VHF aad UHF Anlels
If you have _o
separate antennas for your TV (one VHF and one UHF), you mus_combine the
lwo antenna signals before connecting them to the TV. This _equires a combiner atiachment, which
you can Buy at an electronics slope
Connecl Both antennQ
leads te the combiner
Plug the combiner into the
_
on the
ANT-A terminal
Back panel oFthe TV