Labelingchannels; Lna _Ownoiseamplifier) - Samsung LN-T4053H Owner's Instructions Manual

Labeling Channels
Channels can be labeled so that their calt letters appear whenever the channel is selected.
1. Press the MENU button to display the menu.
Press the A or _' buttons to select "Channel", then press the ENTER button.
Press the A or _' buttons to select 'Name", then press the ENTER button,
Press the h, or T buttons to select the channel to be assigned a new name_
then press the ENTER button.
Press the _, or V buttons to select a letter_a number or a blank (Results in this
sequence: A...Z, 0...9, +, -, *,/_ blank).
Press the D,-button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the A or v buttons, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
To erase the assigned new name, select "Clear" by pressing the _1 or _ button_
then press the ENTER button.
Press the EXIT button to exit.
:_ The names of digital broadcasting channels are automatically assigned and
thus cannot be assigned by users.
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area_sometimes the LNA function can improve the reception (a low-noise preamplifier
boosts the incoming signal).
1. Press the MENU button to display the menu.
Press the ,_ or _r buttons to select "Channet'_ then press the ENTER button.
2. Press the A or V buttons to select 'LNA", then press the ENTER
button.
3. Press theA or _r buttons to select 'On", then press the ENTER button.
Press the EXIT button to exit.
>_ LNA functions when the antenna is set to Air or Cable. Settings will be stored
separately in each channel. (See "Selecting the antenna." on page 39.)