Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates when watching regular analog channels or when you have an analog external component
(such as a VCR) connected.
1.
Press the MENU button to display the menu.
Press the A or T buttons to select "Setup", then press the ENTER button.
2.
Press the A or _' buttons to select 'Caption'_ then press the ENTER button.
3.
Press the ENTER button to select "Caption".
Press the A or T buttons to select "On", then press the ENTER button.
Press the A or T buttons to select "Caption Mode", then press the ENTER button.
Press the A or _r buttons to select submenu (Default, CC1~CC4 or Textl~Text4)
you want, the press the ENTER button.
Press the EXIT button to exit.
• The default is "COl",
• CCl: The Primary Synchronous Caption Service. These are captions in the
primary language that must be in sync wJ[nthe sound, preferably
ma[cnea _oa specific frame.
• CC2: The Special Non-Synchronous Use CaD_lons.
This channel carries data [nat is intended to augment information carriea
in me program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caDt_ondata, typically secona anguage
caDtIons.
• CC4: Specla Non-Synchronous Use Caations. Similar to CC2
• Te×tl: First Text Service. This ma, be vanous non-program reIatea data
• Te×t2: Second Text Service. Additional aa[a. usually not program reiate
• Te×t3/Text4: Third and Fourth -ext Services.
These data channels should be used on y f Text1 and Text2 are
not sufficient
>The Caption feature doesn't work in COMPONENT_ HDMI or PC modes.
The availability of captions depends on the program being broadcast.
Press the CAPTION button repeatedly to select 'On" or "Off".