Table of Contents
Advertisement
Connections
getup
Step 3: Configuring for a VCR
The next series of screens asks you about your VCR setup.
If you connected a VCR to the IV, you will need to follow the
on-screen instructions
to select your brand of VCR and run a
system test so that the one-touch
record feature will work
properly.
No tes: If your VCRbrand isn't listed, choose the No t Listcd ophon.
Lc_w* 1he cable box on _o download program hstmgs Lcow* your
VCR off to record programs
wJzh thc Guide Plus+ One Touch Rccord
fcdtufc
Step 4: Confirming Your Settings
•
Check to make sure all settings are complete and correct.
If all settings are complete,
highlight
Yes, end setup and
press OK. If your cable box and/or VCR code testing
failed, you should see INCOMPIETEwhere
the cable
box and VCR codes are listed. Once setup is complete,
additional
screens appear.
If any settings are incomplete
or incorrect, highlight
No,
repeat setup process and press OK. Follow the
instructions
on the screen.
You can choose to view a demo of the GUIDE Plus+
features, which may take a few minutes to load. If you
don't want to see the demo right now, press OK to watch
13/.
Downloading
Data
The GUIDE Plus+ system is not available until it completes its
first download of program information.
To ensure that your
first download of data is complete, you should leave your IV
off overnight.
If you use a cable box, be sure to leave it on.
Downloads occur several times a day. The IV must be turned
off for GUIDE Plus+ system data to download.
10
Graphics contained
within this publication
are for representation
only
Chapter 1
Advertisement
Table of Contents
