Dell OpenManage Network Manager Quick Start Manual page 15

• Excessive interface errors
When you receive an alarm you can take any of the following action on the alarm itself, or the
target of the alarm:
• Assign User
• Acknowledge Alarm
• Unacknowledge Alarm
• Clear Alarm
• Show Performance
Follow these steps to get started:
Click to go to the Alarms page from the default screens.
1
In the Alarms portlet, click on an Alarm of interest.
2
Tip
If your Alarms portlet displays a graph of different alarm types, clicking on s particular alarm severity
filters the list below to only display that severity. Click again to undo the filter effect.
Right-click on the selected alarm, and then click Acknowledge Alarm to take ownership of the
3
alarm.
Right-click then click Assign User to select a user owner for the alarm.
4
Right-click then click Clear Alarm to remove the alarm from list.
5
Click the plus (+) in the upper right corner of the Alarms portlet to go into Expanded mode
6
where you can view more details about an alarm.
13