Table of Contents
Advertisement
Setup the Wi-Fi Network:
NOTE: Since many features require a Wi-Fi connection, it is recommended that the
Wi-Fi network be set up with the first use.
1
From the HOME screen, tap the Wireless & Network Settings icon
2
From the INTERNET SETTING menu, tap "Wi-Fi" to enable a Wi-Fi connection.
NOTE:
3
Tap "Add Wi-Fi network" to allow the device to automatically scan and to list all
the local Wi-Fi Networks found in range of the device.
NOTE:
to connect.
4
Tap the desired network to which you want to connect.
5
Enter the Network Information (password), if applicable.
6
Tap Connect to allow the device to attempt to establish a connection to the
selected Wireless Internet port.
7
If the connection is successful, the message "Connected to (your network name)"
will appear under the Internet Settings.
Connecting to a USB Device
1
Insert a USB device (U-disk, for example) into the USB interface on the device.
CAUTION: Do not insert and remove the USB device repeatedly in a short
time, as this may cause damage to the device.
MicroSD Card
NOTE: The device supports a maximum 32GB microSD card.
To insert a microSD card:
Insert a card into the microSD slot until it clicks into place.
To remove a microSD card:
CAUTION: Don't insert and remove the microSD card repeatedly in a short time,
as this may cause damage to the card.
1
Close all applications and documents which have been opened from the card.
2
Tap the INDEX icon
3
Select Settings.
4
Select SD card & device storage.
5
Select Unmount SD card.
6
Press the card lightly to partially eject it.
7
Remove the microSD card from the slot completely.
10
|
Using the eGlide Pro III
indicates Wi-Fi is enabled.
indicates secure networks that require a login name/password
.
.
Advertisement
Table of Contents
