Channels; Setu - RCA F32649YX57CA10 User Manual

Channels menu Channels menu
action buttons selection
\
Channels
You can customize the channel listing by enabling or disabling the display of
certain channels. For instance, you may disable channels that you never watch.
You can restore disabled channels at a later point in tinqe.
1. If the Guide Plus+ systenq isn't on your screen, press GUIDE on your
renqote control.
2. Press MENU to select the Menu ban
3. Use the right and left arrows to highlight the Channels nqenu selection.
4. Use the up and down arrows to select a channel.
Then use the Channels Menu Action Bultons as described next.
Channels Menu Action Buttons
While browsing the Channels menu, the following Action buttons appear:
• Cancel Press 1 on lhe remote to cancel any changes you made since
entering the Channels Menu.
• Change Press 2 on the remote to change the channel number for the
highlighted channel line.
• On/Off Press 3 on the remote to toggle the state of the channel between
On and Off
Setup
The Setup menu allows you to access the GUIDE Plus+ system setup information. To access the
Setup option:
1. If the Guide Plus+ system isn't on your screen, press GUIDE on your remote control.
2. Press MENU to select the Menu Bar.
3. Use the right arrow to highlight the Setup menu selection.
4. Use the up and down arrows to select Change system settings, Review options, or
View demo.
• Change system settings Confirms the settings you completed in the GUIDE Plus+
system setup are correct.
• Review options Displays lhe GUIDE Plus+ auto display options.
On Automatically displays the GUIDE Plus+ system when you press the ON • OFF
button on the remote control.
Off Disables lhe GUIDE Plus+ system from being displayed when you press the
ON • OFF button on |he remote control.
• View demo Runs the GUIDE Plus+ system demonstraliort
Note:
1,f y ou
have not completed your GUll)E Plus+ system setup, these options will not be
available. A screen will prompt you to complete your setup.
34