Table of Contents
Advertisement
Special Recording
onto VCR
(This connection
only allows you to record on the VCR
whatever is currently
being displayed
on the TV screen)
This is not a common application for
recording with your VCR, but you may
find it useful in certain situations. This
connection will let you record onto the
VCR whatever is being displayed on the
TV screen such as a TV program. You'll
also be able to record signals from
another VCR (or similar device) that is
connected to the TV's INPUT 1 or 2
jacks.
The TV must remain turned on during
recording. If you change channels on the
TV, the channel change will be recorded
on the VCR tape unless you pause the
VCR during recording.
Because your TV is cable-compatible,
this
application may be used to record cable-TV
programs from the TV onto a VCR that is not cable-
compatible.
You may also want to use this connection to dub or edit VCR
tapes with two or three VCRs. By connecting one VCR (or
camcorder) to the INPUT I jacks and another VCR (or
camcorder) to the INPUT 2 jacks, you'll be able to selectively
edit and record whatever is playing on the TV screen onto a
third VCR (or camcorder) connected as shown here to the
SELECT 0 UT jacks.
Back of VCR
L
Back of "IV
HI-FI - OUT ÷ S_t,E¢I"
AudioNideo
Cables*
._,-I
I
I
(such as RCA #AH069G)
_
L !
I
_o
To see the signal from a device connected
to the INPUT
I jacks,
select channel
91. Select channel 92 to see the signal from a
device connected
to the INPUT
2 jacks.
Notes: Signals from the S-VIDEO connector do not come thru the
SELECT OUT jacks. To record from an S-VHS component, remember
to also connect the regular video cable to the VIDEO INPUT I jack
and then tune to channel 91.
You will not be able to record the picture-in-picture
inset picture or any
of the menus or status displays.
S-VHS (Super VHS) VCR
(This connection
allows you to record
TV programs
and play back tapes.)
Incoming
Cable
AudioNideo
Cables*
(such as RCA
#AH069G)
Back of VCR
S-VHS Cable (such as RCA #186008)*
Coaxial Antenna Cable*
(such as RCA #AH037)
/
/
/
,/
Shown here is one method of connecting your S-VHS VCR to
your TV. Connect the S-VIDEO OUTconnector
on the back
of the VCR to the S-VIDEO connector on the back of your TV
using an S-VHS cable. Remember to connect the audio cables
from the VCR to the INPUT 1 LEFT and R/MONO jacks on
the back of the TV. The S-VHS cable carries only video.
Note: Remember to also connect the video cable for picture-in-
picture viewing or if you plan to use the SELECT OUT jacks for
recording. When recording from SELECT OUT jacks, tune the TV to
channel 91 to see the signal from the S-VHS VCR. When displaying
picture-in-picture,
the "IV automatically minimizes any annoying
differences in tint between the small and large picture by electronically
coupling the S-VIDEO input to the VIDEO 1 input.
Operation:
If the S-VHS VCR is connected
as shown above,
tune the TV to channel 90 to view whatever
the VCR is playing.
The word S-VIDEO
will appear on the TV when you select
Channel 90.
* Optional accessories are available from most RCA dealers and electronics supply stores.
31
Advertisement
Table of Contents
