Table of Contents
Advertisement
PC VIDEO
INPUT
CONTROLS
This menu item will appear if the TV PC input is selected. There are four
ways of selecting the PC input:
• by selecting the PC input from the active channel list using the CH
+/- buttons
• by pressing the WHOalNPUT button
• by auto tuning with the remote
(see the "Using the Remote"
section)
• by selecting channel
128
Make sure your TV is connected
to a PC or similar device before selecting
PC Video Input Controls.
Computer or
similar device
@ @@,.
%°,
L
i
DSCIPORT
CABLE/
ANTENNA
•
]
Most computer video signals operate at
speeds substantially higher than those of
television signals. Because of this, when a
computer video signal is converted for
display on a television, some reduction in
clarity from the original image is to be
expected.
This monitor
accepts signals with a resolution
of up to
2048x 1536@ 152 hertz vertical refresh rate.
Selecting PC Video Input Controls from the Main menu brings up the
screen shown below, which explains how to use the remote control
when the PC input is selected. The functionality
of these controls is
explained
below; there is also a Quick Reference at the end of this
section.
40
Advertisement
Table of Contents
