Edimax EW-7428HCn Quick Installation Manual page 3

On
(2) Wi-Fi
Flashing
On
Off
(3) LAN
Flashing
Item Function
(4) Reset/
WPS
Note: Please note that the hardware WPS button
only works when connecting to wireless clients. It
will have no effect when the device itself is in
Wireless Client Mode.
Back Panel
Item Name
(5) LAN Port
(6) 5V DC
Note: Please do not connect the power adapter if
the device is already connected to a PoE switch via
the LAN port.
WPS is activated and the device is waiting for a
WPS signal from another device
Wi-Fi activity (transferring data)
Connected to a local area network
Not connected to a local area network
LAN activity (transferring data)
Description
WPS Press and hold this button for 2 seconds to
activate WPS mode, during which this device will
attempt to automatically connect to a
WPS-enabled client device.
Reset To reset the device to factory default settings,
press and hold the button for 10 seconds, until
the Power LED starts flashing. Release the button
to initiate reset procedures.
Description
Connects to an Ethernet cable. This device is capable of
Power over Ethernet (PoE), so if the cable is connected
to a PoE switch, then this device will be powered by the
Ethernet cable alone.
Connects to the power adapter.
2