Eden WT-550 World Tour Series Operation Manual

Eden WT-550 World Tour Series Operation Manual

World tour series amplifiers
Hide thumbs Also See for WT-550 World Tour Series:

Advertisement

Eden Electronics Operation Manual
World Tour Series Amplifiers
WT-550 Bass Amplifier
World Tour Series
Owner's Manual
2/15/03
1

Advertisement

Table of Contents
loading

Summary of Contents for Eden WT-550 World Tour Series

  • Page 1 Eden Electronics Operation Manual World Tour Series Amplifiers WT-550 Bass Amplifier World Tour Series Owner’s Manual 2/15/03...
  • Page 2 This compact, rack mountable package houses modular circuits made with superior components a nd designed for years of trouble-free service. Thank you for choosing Eden. Please take the time to review this manual and to send in your warranty registration card.
  • Page 3: Front Panel Features

    FRONT PANEL FEATURES controls select the frequencies you wish to boost or cut. Input Jack – Designed to accept a Boost/Cut Controls – Located beneath standard ¼ inch mono phone plug. For best each frequency selection control, these results, use a high-quality, shielded cable to controls will boost or cut the selected connect your instrument to the amplifier.
  • Page 4: Operating Instructions

    the amplifier to a qualified technician. The internal temperature reaches 130 degrees F. Wiring diagrams for the changes are inside In low volume situations (into 8 Ohm loads) of the unit. the fan may not come on at all. The system Do not use fast blow fuses.
  • Page 5 quality 16 gauge or larger unshielded Overall bass and treble adjustments can be speaker cables. We recommend 10 or 12 made with the Bass and Treble controls. gauge cables. The use of shielded line or These controls cover a fairly broad range of instrument cables for speaker connections the frequency spectrum.
  • Page 6: Other Considerations

    8 Ohm speaker available deoxidant. Frequent cleaning of option so that you can add another speaker the plugs on your cords is also later if you need to. Common Eden David recommended. Series cabinets chosen to accompany the WT-400 include: Dust Removal –...
  • Page 7 Always disconnect the power cord from the back of the unit prior to removing the cover. Gently remove the tube and replace with an Eden 7025 /12AX7 or high quality equivalent tube. Service – In the event of amplifier malfunction, or questions about your unit’s operating features, you should...
  • Page 8 EQ Settings Setting name: _____________________ Setting name :___________________ Setting name: _____________________...

Table of Contents