Standard Cmos Setup - ECS Motherboard Manual

28

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility -- Copyright (C) 1985-2007, American Megatrends, Inc.
Date
Time
SATA1
SATA 2
SATA 3
SATA 4
SATA5
SATA6
IDE Master
IDE Slave
IDE BusMaster
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
SATA1
This motherboard supports six SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
CMOS SETUP UTILITY – Copyright (C) 1985-2007, American Megatrends, Inc.
SATA1
Device :
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
LBA/Large Mode (Auto)
Use this item to set the LAB/Large mode to enhance hard disk performance by
optimizing the area the hard disk is visited each time.
Standard CMOS Setup
Fri 12/07/2007
00:11:10
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Enabled
: Move Enter : Select
+/-/: Value
F1: General Help
F9: Optimized Defaults
SATA1
Not Detected
Auto
Auto
Auto
Auto
Auto
Enabled
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1: General Help
F9: Optimized Defaults
Using BIOS
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
F10: Save ESC: Exit
Help Item
Disabled: Disables LBA
Mode.
Auto: Enables LBA
Mode if the device
supports it and the
device is not already
formatted with LBA
Mode disabled.