Input Signal - Yamaha DVX-S120 Owner's Manual

Input signal
information
• (Format)
Shows the input signal format. When file digilal input
cannot be recognizezl, the mode is set to analog,
__la]og Audio Analog
IKTM Audio PCM
Ddiby Digital Audio Do]by DGTL
DTS Audio DTS
Oilier Digilal Signals Unknwn DGTL
• (Audio Channels)
Shows the armlber of"audio channels an input signal
contains (only when Dolby Digital or DTS is inpuf).
For example, "in: 3i2iLFE" indicates 3 Front Channels,
2 Surround Channels and LFE.
"] +]" indicates Main + Sub in bilingual broadcasts or
other 2 channel audio, and MLT indicates 3-channel or
more multi-channel audio,
• fs
Shows file frequency sampling of an input signal (on])"
when digital signal is input)!, If the sampling frequency
cannot be measured, "unknown" appears,
• rate (bit rate)
Shows the amount of data an input signal contains per
second (unly Dolby Digital and DTS). If the bit rate
cannot be measured, "unkmown" appears.
• flg (nag)
Shows a roaognifiun signal (flag), in an input signal and
initiates an action (only Ddiby Digital and DTS). If the
flag cannot be recognized, "None" appears,
Note on digital signals that exceed 48 kHz
CinemaStation's digital input jack can input a smnpling
frequency up to 96 kItz. For details read the owner's
manual of the devic_ connoatcxl to the digital input jack.
Koap in mind the points below when inputting a digital
signal that exceeds 48 kItz.
• DSP Programs are not seloatable. You can only listea to
normal 2-channel stereo frtml the Front Speakers.
• During playback, you cannot adjug the vditmle lCNClof
Centes and Surround I JR Speakers.
• Depending on the "* Speaker Set" _Zting in the SET
MENU, the Subwoofcs may output sound.
76