Whirlpool Cabrio WTW8200YW0 Use And Care Manual page 50

7, Select cycle
CASUAL
SHEETS
ACTIVE WEAR
,_d:, s
DELICATE
NORMAL
CLEAN CARE
BULKY ITEMS
HEAVY DUTY
WHITES
QUICKWASH
RINSE CLEAN
DRAIN SOAK WASHER
& SPIN with8[_8_
I Est+Time Remaining
Turn cycle knob to choose
your wash cycle. Estimated
Time Remaining will light
up with a cycle time. You
may notice time adjusting
during the cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option.
To choose a delay time:
1. Press DELAY WASH button to select desired delay time.
2. Press START/PAUSE to set the delay. The delay countdown
has started when the START/PAUSE light stops blinking.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
8, Select cycle modifiers, if desired
Heavy
Normal
Medium
L ght
@
Soil
Level
Hot
[_i H igh ii Warm
Medium ii/ Cool
Li Low Jcold
@
Spin Wash
Speed Temp
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle modifiers buttons to change the Soil
Level, Spin Speed, and Wash Temp, if desired. Not all settings
are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
10
Wash Temp : Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable garments
your hot water heater setting. Heavy soils
Warm
Some cold water will be added, so Bright colors
this may be cooler than what your Moderate to light soils
previous washer provided.
Cool
Warm water is added to assist in Dark colors that
soil removal and to help dissolve bleed or fade
detergents. Light soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
9. Select cycle options
On
EcoBoost Off
Extra Fabric
Rinse Softener
Dispenser
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off,
if desired.
NOTE: Not all options are available with all cycles.
1 0. Press START/PAUSE to begin
wash cycle
START
Pause
@
Press the START/PAUSE button to start the wash cycle. When
the cycle has finished, the DONE indicator will light and the end
of cycle signal will sound (if set). Promptly remove garments
when cycle is done to avoid odor, reduce wrinkling, and rusting
of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/PAUSE again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out.