Door Removal, Leveling And Alignment - Whirlpool WRS537SIAF00 User Instructions

©oo Bemova Leveling and AHgnment
Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove
food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.
TOOLS NEEDED:
Bubble level, Phillips screwdriver, 3_6" hex key, 1/4" hex-head socket wrench, 1/4" and 8/le" open-ended wrenches or adjustable wrench,
internal star drive or 3/8" hex-head socket wrench
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Top Left Hinge
A. Do Not Remove Screws.
Wiring Connection
A B C D E
A. P-clamp
B. Routing Plate
C. Electrical Housing
D. Wiring Clip
E. Grommets
F. Wiring Plugs
Water Dispenser
Tubing Connection
A
A. Face of Fitting
Door Removal
Base Grille
Top Right Hinge
A. Do Not Remove Screws.
Bottom Hinges
(Left and Right)
O
Leveling
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
Door Alignment
(Bottom Right Hinge)
,4 ___' Raise
Lower _ "_ _
A. Alignment Screw