Channel Menu - VIORE LC32VH60 Operating Instructions Manual

6. Channel menu
OSD Menu
Air/Cable: Allow you to select antenna between Air and Cable.
If you selet "Cable", the following items(Favorite, Show/Hide, Channel NO, Channel Label
and DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.
-k If you select "Cable" as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Use V button to highlight the "Start to Scan", then press >
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
If you select "Air" as input signal in Antenna item, you _
can press > button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC orATSC
mode, please wait patiently.
Favorite: Allow you to add these channels which you desired as the favorite channels.
Use/_ / V button to highlight the desired item, then press
OK button to add or remove the highlighted channel as
favorite.
16