Removing And Replacing Light Bulb - Singer 9134 Instruction Manual

REMOVING AND REPLACING LIGHT BULB
CAUTION:
o Before changing light bulb, make sure you have removed plug from socket outteL
Be sure to replace the face plate which covers the light bulb before operating
the machine,
/
• This machine is designed to use a 15-
watt rnaximum light bulb_
To change the light bulb, the face plate
must first be removed,
o Looser and remove screw (1).
e Slide face plate down and away from
machine_
\
TO REMOVE THE LIGHT BULB
o Push bulb up into socket (2) and turn to
the left to unlock bulb pins,
o Pull bulb down and out of socket,
TO REPLACE THE LIGHT BULB
Push new bulb up into socket and turn
to the right until pins lock into position.
,, Reposition face plate by sliding top edge
of plate under edge of top cover,.
o Line up screw hole in plate with screw
hole in machine,,
Insert screw and tighten,,
39