Press Vol +/- To Access Thetv - Sharp 27SF56B Operation Manual

..... setUP (c°ntinued)
BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received. After 15 minutes of non-reception, the TV will turn off
automatically°
,,,, ,, ,,,,q','H_,'Lr' ,_ ,-,
®@®
(_ (_ (_) VOLUME
_@_@® (+);(-)
_C_ CHANNEL
UP(A)/
@ DOWN(V)
OL___ 0
MENU
Press MENU to access the MAIN MENU screen,
Press CH AtV to move the "_" mark to "SET UP",
Press VOL +t- to access the SET UP screen,
MENU
©
_,_ENU
_SLEEP TIMER
L_VIDEO ADJUST
_AUDJO BELECT
_DIGITAL AUDIO
##._CLOSED CAPTION
_PARENT CONTROL
_'_EUERGY SAVE
@_BET
UP
(MAIN MENU screen)
Press VOL +/- to access the BLUE SCREEN select screen.
_SET UP
@BLUE SCREEN
PERSONAL
PRER
UNWEREAL PLUS
LANGUAGE
ON SETTING
AUTO INPUT
CH/INPUT ID
SCREEN FORMAT
(SET UP screen)
BLUE SCREEN:OFF
BLUESCREENselect screen'
Press VOL +/- to select "ON" or"OFF",
BLUE SCREEN:ON
Press MENU to exit,
When the BLUE SCREEN is set to "ON"
MENU
©
No signal Blue screen
---J-----4r, t _l..
after 15
minutes
Power turns off
automatically
Standby mode
, Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN "OFF".
While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.