On-Screen Display Menu Operation; Menu Operation Buttons - Sharp AQUOS LC-46D85U Operation Manual

On-Screen Display Menu
Example
"_[ _ Picture
IIIIIIIIIIIIIIIIIIIIIIIIIIII
Example
Option
Output select _ (_
®
®
®
T_he bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
Press 4/1_ to select the desired item.
Press A/T to select the desired item.
(._ Press 4/1_ to adjust the item.
}
®
®
Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
Item in brackets
• This indicatesthe current settingfor the item.
Item displayed in white
• This indicatesthat the item can be selected.
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
--Nothing is connected to the selected input terminal.
--The function is not compatible with the current input
signal.
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Using the remote control
Use the following buttons on the remote control to
operate the menu.
ENTER:
RETURN:
Press to open or close the menu screen.
Press to select a desired item on the screen or
adjust a selected item.
Press to go to the next step or complete the
setting.
Press to return to the previous step.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
iA
vi _ VOL+/-: Cursor 4/1_ on the
remote control.
MENU: MENU on the remote
control.
INPUT: ENTER on the remote
control.
OH/X/V: Cursor A/Y on the
remote control.
Q- 20