Audio Menu; Surround; Bass Enhancer - Sharp AQUOS LC-46D85U Operation Manual

On-Screen Display Menu
Converts input signals depending on the type of images.
Fast: Suitable for fast-moving images
Slow: Suitable for smooth images with low amounts of
flickers
• "l/P Setting" is not selectable when channel display shows
an input resolution of 480p, 720p, or 1080p.
You can adjust the sound quality to your preference
with the following settings.
Example
[9 Audio
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
On: Detects, analyzes,convertsfilm source.
Off: Normal viewing mode.
• "Film Mode" does not function when you set the "AV Mode"
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480p, 720p, or 1080p.
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired level for viewing a
clearer video image.
• "Digital Noise Reduction" is not selectable when channel
display shows an input resolution of 1080p.
• Deep Color is not supported when Digital Noise Reduction
is selected.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off (2D}: For Game Mode.
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
The brightness level range of the OPC sensor's automatic
adjustments
can be set
according
to your
preferences.
The
adjustment
range of the OPC sensor can be set to
a maximum of +16 and a minimum of -16.
Max.: -15 through +16
Min,: -16 through +15
• The range of OPC settings are active only when the OPC is
set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
(D- 22
i F SE
sl
'8"° /
1
Press MENU to display the MENU screen, and then
press _1/1_ to select "Audio".
2 Press A/T to select a specific adjustment item.
• Select "Surround" or "Bass Enhancer"and then press
ENTER to set each item.
3 Press A/T (or _1/1_) to select the desired setting,
and then press ENTER.
Press MENU to exit.
4
Treble
Bass
Balance
For weaker treble For stronger treble
For weaker bass For stronger bass
Decreaseaudio from Decreaseaudio from
the right speaker the left speaker
• Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
• For resetting all Audio adjustment items to the factory
preset values, press A/V to select "Reset", press ENTER,
press _/1_ to select "Yes", and then press ENTER.
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
• You can choose Surround by pressing SURROUND on the
remote control unit. (See page 15.)
• Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
• For some discs, setup may be required on your DVD player, In this
case, please referto the operation manual of your DVD player.
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
• Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)