Dnr; Sound Control Adjustment; Selecting Stereo/Second Audio Program (Sap); Selecting The Audio Language - Sansui HDLCD2600A Owner's Manual

6
7
After adjusting, press ENTER to return to the PC
Setting menu. Then continue to adjust the other
items.
Press EXIT to return to the normal screen.
NOTE:
• If no buttons are pressed for more than approx. 30
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
• The PC settings are not effective for other input
modes.
DNR
DNR (Digital Noise Reduction) can reduce the
roughness of the picture.
Press MENU.Then • or • to select
press
"Picture", then press I_ or ENTER.
Press • or • to select"DNR". Press < or _ to
select "On" or "Off".
Press EXIT to return to the normal screen.
Sound control
adjustment
Press MENU.Then • or • to select"Audio",
press
then press I_ or ENTER.
Press • or • to select the item want to
you
adjust.
3
Bass: Press • or _- to adjust the bass sound.
Treble: Press • or _- to adjust the treble sound.
Balance: Press • or _- to obtain an equal sound
level from both speakers.
• Press • or • to change the adjusting item.
After you desired setting, press EXIT to return to
the normal screen.
Selecting Stereo/Second
Audio Program (SAP)
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
When the TV receives a stereo or SAP broadcast,
the word "Stereo" or "SAP" displays on-screen
every time you press DISPLAY.
1
2
Press MENU. Then press • or • to select"Audio",
then press _ or ENTER.
Press • or • to select "MTS", then press • or
to select "Stereo".
Press EXIT to return to the normal screen.
NOTE:
• Generally you can leave your TV in stereo
mode because the TV automatically outputs
the type of sound being broadcast (stereo or
mono).
• If the stereo sound is noisy, select"Mono" to
reduce the noise.
To listen to a second audio program (SAP)
Press • or _- to select"Sap" in step 2 above. The
TV speakers will output the second audio program
instead of normal audio.
Selecting the audio
language
When two or more audio languages are included
in a digital signal, you can select one of the audio
language.
Press MENU. Then press • or • to select"Audio",
then press _ or ENTER.
Press • or • to select"Audio Language". Then
press • or _ to select your desired language.
Press EXIT to return to the normal screen.
25