Download Print this page

Samsung Smart Camera NX1000 User Manual page 73

Smart camera
Hide thumbs Also See for Smart Camera NX1000:

Advertisement

iiThis camera c anhave minute d istortion w hen
Photos a redistorted using a wide-angle lens thatenables shooting
witha wide angle ofview. T his isnormal, and
does notcause malfunction.
Playback screen d oes o Ensure thatHDMI cable isproperly connected
notappear onthe
totheexternal monitor.
connected external
o Ensure thatthememory cardisproperly
device
recorded.
o Ensure thattheUSB cable isconnected
Your c omputer does
correctly.
notrecognize your
o Ensure thatyourcamera i sswitched o n.
camera
o Ensure thatyouareusing asupported
operating system.
Your c omputer
The filetransfer may beinterrupted bystatic
disconnects the
camera w hile
electricity. Disconnect theUSB cable and
connect itagain.
transferring files
Depending onthesoftware youuse, v ideo files
Your c omputer cannot may notplay. Toplay video files captured w ith
play videos
yourcamera, install andusetheIntelli-studio
program onyourcomputer. (p.141)
o End Intelli-studio andrestart theprogram.
Intellimstudio
isnot
o You cannot useIntelli-studio
onMacintosh
functioning properly
computers.
Cannot settheDPOF
You cannot settheDPOF f orRAW files.
forRAW files
o Subject isnotinfocus. W hen thesubject is
outside t heAFarea, shoot b ymoving t he
subject inside theAFarea andhalf p ressing
AutoFocus d oes not
[Shutter].
work
o Subject istooclose. Step back fromthe
subject andshoot.
o The focus mode issettoMRSwitch the
mode toAR
AEL feature d oesnotworkin
SMART, M, ©,
AEL feature does not
_
and SCN modes. Select another mode to
work
use this feature.
o Ensure that the lens is properly mounted.
Lens does not work
o Remove the lens from the camera and
re-mount it.
External flash or GPS
Ensure that the external device is properly
does not work
mounted and turned on.
o Set the date and time again.
The date & time
settings screen
appears when you
power on the camera
This screen appears when the camera's
internal power source is completely
discharged.
Insert a fully charged battery and
wait at least 72 hours in power off status for
the internal power source to be recharged.

Advertisement

loading