Samsung Smart Camera NX1000 User Manual page 44

Learn about the menu items of the Setting 3. * Default
* Default
, System Volume: Set the sound volume or turn all sound
off entirely. (Off, Low, Medium*, High)
, AF Sound: Set the sound the camera makes in AF mode
Sound
on or off_ (Off, On*)
o Button Sound: Set the sound the camera makes when
you press buttons on or off. (Off, On*)
, Sensor Cleaning: Remove dust from the sensor.
o Start-Up Action: When on, the camera performs sensor
cleaning each time you turn it on. (Off*, On)
Sensor
Cleaning
Set the video signal output appropriate for your country
when connecting the camera to an external video device
such as a monitor or T\/.
o NTSC*: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
Video Out o PAL (Supports only PAL B, D, G, H, or I): Australia,
Austria, Belgium, China, Denmark, Finland, France,
Germany, England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway, etc
_ When you connect the camera to an HDTV that supports
_ Anynet+ (HDMI-CEC), you can control the play function of
the camera with the TV remote control.
Anynet+
_/tHDMImCEC_ , Off: You cannot control the play function of camera with
the TV remote contro!.
° On*: You can control the play function of camera with the
TV remote control.
When you connect the camera to an HDTV with an HDMI
cable, you can change the resolution of the image.
° NTSC: Auto*, 1080i, 720p, 480p, 576p (activates only
HDMI when PAL is selected)
Output
View the firmware version of the body and the lens, Wi-Fi
MAC address, and network certification number, or update
the firmware.
o Firmware Update: Update the firmware of the camera
body or lens. (Body Firmware, Lens Firmware)
Device
Information