Table of Contents
Advertisement
Available languages
Available languages
w hing
of Andr7
My Cycle
Allows you to activate
your custom
wash (temperature,
spin, soil level, etc.) with one-button
convenience.
By pushing the My Cycle
button,
you activate the settings
used during the My
Cycle
mode. The "My Cycle"
light goes on, indicating
activation.
You can select all options
as
follows
in "My Cycle"
mode.
t.
Press the My Cycle
button
on the Control
Panel.
2.
Select the cycle using the Cycle Selector
dial.
3.
After cycle selection,
set each option.
[_See
36 for available option
settings with each cycle.
page
4.
Start "My Cycle"
by pushing the Start/Pause
button
in "My Cycle"
mode.
The washer will display the cycle and options you selected
the next time you choose
"My
Cycle".
You can change the "My Cycle"
settings
by repeating the process above.
The washer
displays the last settings
used the next time you choose
"My Cycle".
To program
"My Cycle" settings
into your washer, the washer
needs to complete
an entire
wash cycle. If for any reason the wash cycle is interrupted
and the washer
does not finish
the cycle, it will not program
in the settings for later use.
24
Washing a load of laundry
WF395BTPA-03145B(XAA)
EN 20120619.indd
Sec11:24
2012-06-19
Z-8:21:46
I
Advertisement
Table of Contents
