Network Connection; Connecting To A Wired Network - Samsung Series 6 6500 UN65C6500 User Manual

Advanced Features
You can set up your 77/so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
Connecting to a Wired Network
You can attach your 77/to your LAN using cable in three ways:
• You can attach your 77/to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
TV RearPanel
TheModemPortontheWall External Modem
(ADSL / VDSL/ CableTV)
J "_.._
}
o
LAN Cable (Not Supplied)
You can attach your 77/to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use a Cat 5 cable for the connection. See the diagram below.
TtTe ModemPortontlTe Wall External Modem
........ _..:._-- ..... (ADSL / VDSL/ Cable77/)
{Not Supplied) (Not Supplied)
IP Sharer
(havingDHOP server)
TV Rear Panel
(Not Supplied)
TtTeLAN Port on the Wall
LAN Cable (Not Supplied)
TV Rear Panel
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don't have to enter them manually. Most home networks are
Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
4 English