Controlling The Temperature; Using The Cold Water Dispenser - Samsung RF266AB User Manual

Hide thumbs Also See for RF266AB:
Table of Contents

Advertisement

Available languages

Available languages

CONTROLLING THE TEMPERATURE
Controlling
the Freezer temperature
The Freezer temperature
can be set between
8°F and -14°F to suit your particular needs. Press the
Freezer button repeatedly
until the desired temperature
is shown in the temperature
display. Keep in
mind that foods like ice cream may melt at 4°F.
The temperature
display will move sequentially
from -14°F to 8°F. When the display reaches 8°F, it will
begin again at -14°F.
Five seconds
after the new temperature
is set, the display will again show the actual current freezer
temperature
until the new temperature
is reached.
Controlling
the Refrigerator
temperature
The Refrigerator
temperature
can be set between
46°F and 34°F to suit your particular
needs. Press
the Fridge button repeatedly
until the desired temperature
is shown in the temperature
display.
The temperature
control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature.
After a few seconds,
the Fridge will begin
adjusting
towards
the newly set temperature.
This will be reflected in the digital display.
_The
temperature of the Freezer or the Refrigerator may rise from opening the doors too frequently, or if a
large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their
normal set temperatures, the blinking will stop.
If the blinking continues, you may need to "reset" the Refrigerator. Try unplugging the appliance, wait for
around 10 minutes and then plug the power cord back in.
USING THE COLD WATER DISPENSER
Using the Water dispenser (RF266AB)
Place a glass underneath
the water outlet and push gently
against the water dispenser
lever with your glass. Make sure
the glass is in line with the dispenser to prevent the water from
splashing
out.
If you have just installed the Refrigerator or just installed a new
water filter, pour out the first six glassfuls of water to flush out
impurities in the water supply system. Make sure water flows
cleanly before drinking.
If you have a long vacation or business trip, close the water
CAUTION
valve and shut off the water supply to the Refrigerator. This will help prevent accidental leakages.
The water tank's capacity is approximately one third (1/3) of a gallon.
Please wait 1 second before removing the cup after dispensing water to prevent spills.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rf265ab

Table of Contents