Controlling The Temperature - Samsung RF26XAEPN/XAA User Manual

Thisiconwilllightupwhen youactivate t he"Energy S aver" function is automatically setto "ON" when poetis
supplied t otheRefrigerator. If condensation occurs onthedoors, t urntheEnergy S aver f unction off.
Lighting :8:,,,
This icon will light up when you activate the "Lighting" feature. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser,
turn the "Lighting" feature off.
Alarm @)
This icon will light up when you activate the "Alarm" feature. The door alarm will sound if any door is open for
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Ice Off
This icon will light up when you activate the "Ice Off" feature. In this case, the ice will not be produced.
Lock
This icon will light up when you activate the "Lock" feature. In this case, you won't to be able to use the
control panel. If you press and hold the Ice Off / Lock button for 3 seconds, you will be able to use the
control panel again.
CONTROLLING THE TEMPERATURE
Basic Temperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments
are -2°F and 38°F respectively.
If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the
temperature manually.
Controlling the Freezer temperature
The Freezer temperature can be set between 8°F and -14°F to suit your particular needs. Press the
Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in
mind that foods like ice cream may melt at 4°R
The temperaturedisplay will move sequentiallyfrom-14°F to 8°F.When the display reaches 8°F,it will begin again at-14°R
Five seconds after the new temperature is set, the display will again show the actual current freezer
temperature until the new temperature is reached.
Controlling the Refrigerator temperature
The Refrigerator temperature can be set between 46°F and 34°F as your particular needs. Press the
Fridge button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin
adjusting towards the newly set temperature. This will be reflected in the digital display.
_The temperature of the Freezer or the Refrigerator may rise when you open the doors too frequently, or if a
large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their
normal set temperatures, the blinking will stop.
If the blinking continues, you may need to "reset" the Refrigerator. Try unplugging the appliance, wait for
around 10 minutes and then plug the power cord back in.