Setting Up The Refrigerator; Removing The Refrigerator Doors - Samsung RF265AB User Manual

SETTING UP THE REFRIGERATOR
Now that you haveyour new Refrigeratorinstalledand in place, you are readyto set up and enjoy time featuresand
functions of the appliance
By completing time followingsteps, your Refrigeratorshould be fully operational,
1. Placethe Refrigeratorin an appropriatelocation
with reasonableclearancebetween the wall and
time Refrigerator,Referto installationinstructionsin
this manual
2 Once the Refrigeratoris plugged in, make sure time
interiorlight comes on when you open the doors.
3 Set the Temperaturecontrol to the coldest
temperatureand wait for an hour,Time Freezerwill
get slightlychilled and the motor will run smoothly.
4. After poweringthe Refrigerator,it will take a few
hours to reachthe appropriatetemperature.You
can store food and drinks in the Refrigeratoronce
the temperatureis sufficientlycool.
(_ Check the accessorylist below
L
Hex wrench Compression Compression
(DAB0-00002C) fiL'_ing nut
(DA62-O0305A} (DA74-00D70B}
Wa_r filler
(DA29-000Q3B)
Faslener Waster
(DA60*00143B) (DAS0-O0O02C}
REMOVING THE REFRIGERATOR DOORS
If your entrance won't allow the Refrigerator to pass easily Tools you will need
through it, you can remove the doors _[_=======" __ L_
Philips screwdriver 10ram Socket Wrench Allen wrench(3/16"}
Flat-blade screwdriver Pliers
Disassemble the Refrigerator doors
1oWith the door closed, remove the top table((_)
using a Philips screwdriver, and then disconnect the
wires(_)o Remove hinge screws((_}) and ground
screw((_))
o.
63
c
2. Lift the door straight up to remove,,
%
3. With a Philips head screwdriver, remove the two
screws( ['_ ) attached to the lower left and right
door hinges,
With an Allen Wrench(3/16"), remove the two hex
head bolts(@) attached to the lower left and right
door hinges,
Remove the lower left and right door hinges( @ )
Setting Up 9