Changing The Picture Options - Samsung series 5 530 User Manual

Basic Features
Changing the Picture Options
Advanced Settings
(_ MENU rITI_ Picture _ Advanced Settings
ENTER I_
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Picture OP tions .............................................................................
(_ MENU rlTI _ Picture _ Picture Options
ENTER I_
In PC mode, you can only make changes to the Color
Tone, Size and Digital Noise Filter.
m
m
m
m
m
Black Tone (Off / Dark / Darker / Darkest): Select the
black levelto adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High):
Adjust the screen contrast.
Shadow Detail: Increase the brightness of dark images.
Disabled under PC mode.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off/Red / Green / Blue): Displays the
Red, Green and Blue color for making fine adjustments to
the hue and saturation.
Ill Color Space (Auto / Native): Adjust the range of colors
availableto create the image.
Ill White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Ill Flesh Tone: Emphasize pink "flesh tone".
Ill Edge Enhancement (Off / On): Emphasize object
boundaries.
Ill Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Ill Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However,we highly recommend you use
16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1 : Use for moderate
magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time, traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
" After selecting Zoom1, Zoom2 orWide Fit:
1. Press the _ or I_ button to select Position.
2. Press the ENTERE_ button.
3. Press the A, T, 4 or !_ button to move the
picture up or down.
4. Press the ENTERE_ button.
5. Press the _ or I_ button to select Reset.
6. Press the ENTERI_ button.
6 English